10-06-2016, 10:01 PM
Spent the evening as there was nothing on the box, drawing up the vero layout. A couple of points.
1) Unable to determine the full value of the small polycap next to the Xtal. Capacitor tester suggests around the 160pf range.
2) Rotary switch layout determined on observation. Top wafer divided in a 60:40 ratio. Bottom wafer just the basic 1 to 1. Switch mech set to nine positions.
1) Unable to determine the full value of the small polycap next to the Xtal. Capacitor tester suggests around the 160pf range.
2) Rotary switch layout determined on observation. Top wafer divided in a 60:40 ratio. Bottom wafer just the basic 1 to 1. Switch mech set to nine positions.
