28-03-2016, 07:54 PM
OK, let's make a start.
It's 18" Wide, 9" Deep and 12 3/4" High plus the wooden Strips on the Bottom. The two wooden strips are between 5/16" and 3/8" thick depending on where I measure.
Oddly, in my experience with Pyes, the Top is flat and horizontal. Pye seemed to like them sloping, presumably to discourage people from putting the proverbial Plant Pot on the top.
The Plate on the Bottom is a piece of thick Card.
You can probably extrapolate the size of the Hole and the Plastic Surround from the Pictures but if not let me know.
Internally the HT Battery lives on the Shelf and the Accumulator on the RHS.
I'd better Scan the Dial.
Alan
It's 18" Wide, 9" Deep and 12 3/4" High plus the wooden Strips on the Bottom. The two wooden strips are between 5/16" and 3/8" thick depending on where I measure.
Oddly, in my experience with Pyes, the Top is flat and horizontal. Pye seemed to like them sloping, presumably to discourage people from putting the proverbial Plant Pot on the top.
The Plate on the Bottom is a piece of thick Card.
You can probably extrapolate the size of the Hole and the Plastic Surround from the Pictures but if not let me know.
Internally the HT Battery lives on the Shelf and the Accumulator on the RHS.
I'd better Scan the Dial.
Alan






