15-03-2016, 08:47 AM
(This post was last modified: 15-03-2016, 08:48 AM by Radio Fixer.)
Morning all
Trevor you said:
"The losses though on the coax will be down to the bifilar winding on the output toroid which I reckon could be around 150 ohms, I was going to reduce the secondary turns by 50% on mine to see what effect it has. A job for later in the year though."
Did you find this other link and see how this chap has reduced the bifilar turns to 10 rather than 15?
http://www.qsl.net/m0ayf/active-loop-rec...diagram_is
Gary
Trevor you said:
"The losses though on the coax will be down to the bifilar winding on the output toroid which I reckon could be around 150 ohms, I was going to reduce the secondary turns by 50% on mine to see what effect it has. A job for later in the year though."
Did you find this other link and see how this chap has reduced the bifilar turns to 10 rather than 15?
http://www.qsl.net/m0ayf/active-loop-rec...diagram_is
Gary







