12-03-2016, 03:03 AM
Not boring at all.
As has been said, the tolerance was massive in years past so don't worry too much about the exact values.
For smoothing capacitors, bigger may be the way to go.
For reservoir capacitors - beware - with valve rectifiers there is a manufacturer's maximum value to avoid valve damage so near or slightly lower value is best.
FM discriminator capacitors are usually small values, 5uf equates to 4.7uf etc.
Cathode bypass capacitors, often 25uf so anything from 20uf to 33uf, larger will increase the negative feedback in output stages, a bit less gain.
Hope that helps,
Sam.
As has been said, the tolerance was massive in years past so don't worry too much about the exact values.
For smoothing capacitors, bigger may be the way to go.
For reservoir capacitors - beware - with valve rectifiers there is a manufacturer's maximum value to avoid valve damage so near or slightly lower value is best.
FM discriminator capacitors are usually small values, 5uf equates to 4.7uf etc.
Cathode bypass capacitors, often 25uf so anything from 20uf to 33uf, larger will increase the negative feedback in output stages, a bit less gain.
Hope that helps,
Sam.
Boater Sam.







