01-01-2016, 05:17 PM
A bit more info, been on one of the French radio forums, the consensus at the moment is that the original valves would probably have been 3 to 4 volt types with a filament current of 60 ma, that would tie in with 8 ohm rheostat given it's physical size and allowing for de-rating etc.
A typical type being one of these or it's equivalent: http://frank.pocnet.net/sheets/084/r/R14_Rat.pdf
The receiver as a lot in common with the C119 arrangement as shown in the schematic in this link: http://jacrieth.free.fr/TSF/Angic2.html
Lawrence.
A typical type being one of these or it's equivalent: http://frank.pocnet.net/sheets/084/r/R14_Rat.pdf
The receiver as a lot in common with the C119 arrangement as shown in the schematic in this link: http://jacrieth.free.fr/TSF/Angic2.html
Lawrence.







