Cabinet pics as promised:
Top view of the cabinet base:
A view of the underneath of the base:
Outside view of the slats:
The pieces of backing cloth:
Top and underside of top rear panel including its fixing screws:
Top view of the three veneers mentioned in an earlier post, the top edges of the veneers are chamfered in favour of the slats:
Inside view of the left hand side panel showing the innermost veneer towards the rear of the LH cabinet side where the veneers go into the rebate:
Bottom view of the three veneers showing them fixed in the rebate (RH side) there is no glue on the faces of these veneers, the faces are varnished, they are only fixed at the edges, they are fixed at that point by pins:
The rearmost veneer, the fixing pins at the edges had rusted through that veneer which enabled me to remove it completely after this picture was taken:
Lawrence.
Top view of the cabinet base:
A view of the underneath of the base:
Outside view of the slats:
The pieces of backing cloth:
Top and underside of top rear panel including its fixing screws:
Top view of the three veneers mentioned in an earlier post, the top edges of the veneers are chamfered in favour of the slats:
Inside view of the left hand side panel showing the innermost veneer towards the rear of the LH cabinet side where the veneers go into the rebate:
Bottom view of the three veneers showing them fixed in the rebate (RH side) there is no glue on the faces of these veneers, the faces are varnished, they are only fixed at the edges, they are fixed at that point by pins:
The rearmost veneer, the fixing pins at the edges had rusted through that veneer which enabled me to remove it completely after this picture was taken:
Lawrence.







