I've reverse engineered everything now, the details will be on four separate sheets, the 1st sheet is shown below, it shows the schematic, it's a simplified schematic showing only the highest frequency range inductors in circuit, those correspond to wave change switch positions 1. The rest of the inductors and their switch details will be on sheets 2 & 3.
The schematic shows the receiver operating with four valves, it can also be configured as a two or three valve receiver by a selector switch on the control panel, that switching arrangement is not shown in the simplified schematic below, the details for that will be on sheet 4
All the common circuit elements except the above mentioned should be in the simplified schematic.....I hope
Sheets 2, 3 & 4 to follow:
Lawrence. EDIT: Thanks for the info Brian, interesting.
The schematic shows the receiver operating with four valves, it can also be configured as a two or three valve receiver by a selector switch on the control panel, that switching arrangement is not shown in the simplified schematic below, the details for that will be on sheet 4
All the common circuit elements except the above mentioned should be in the simplified schematic.....I hope
Sheets 2, 3 & 4 to follow:
Lawrence. EDIT: Thanks for the info Brian, interesting.







