22-12-2015, 11:14 PM
Some more errors ref the drawing in post#15, the switch, it's very stiff and the detent positions aren't too clear feel wise, should have double checked
Anyways the corrections are listed below:
CENTER POSITION:
Section "a" The pole makes contact with the lower contact not the upper.
Section "b" The pole makes contact with the lower contact and should not be in the mid position.
UP POSITION:
Section "b" The pole makes contact contact with the lower contact not the upper.
Section "d" The pole makes contact with the lower contact and should not be in the mid position. Section "d" continued, the letters "nu" should be inserted just to the right of the lower contact.
I won't be posting an amended drawing, I'll sort it all out when I've reverse engineered the rest of the receiver.
Apologies and all.
Lawrence.
Anyways the corrections are listed below:CENTER POSITION:
Section "a" The pole makes contact with the lower contact not the upper.
Section "b" The pole makes contact with the lower contact and should not be in the mid position.
UP POSITION:
Section "b" The pole makes contact contact with the lower contact not the upper.
Section "d" The pole makes contact with the lower contact and should not be in the mid position. Section "d" continued, the letters "nu" should be inserted just to the right of the lower contact.
I won't be posting an amended drawing, I'll sort it all out when I've reverse engineered the rest of the receiver.
Apologies and all.
Lawrence.







