20-12-2015, 01:43 PM
2nd load of pics, not shown yet is the roller slats/bits, they all came out ok all timber, all seem to be there ok and should go again, the backing cloth to the slats is there but seems to have detached long time ago, the cloth looks past it but might do for a pattern or to establish its weave and original colour:
Valves identified so far (left to right) 1st = Mullard PM1 HF....3rd = Mullard PM2.
Hopefully more to come.
Lawrence.
Valves identified so far (left to right) 1st = Mullard PM1 HF....3rd = Mullard PM2.
Hopefully more to come.
Lawrence.







