02-12-2015, 10:18 AM
This has been done for years. Remember that mains transformers are designed for no DC and to operate at 50/60Hz - for guitar use its an acceptable approach, but not for any sort of quality audio - they are poor.
Having said that, there are manufacturers who produce toroidal transformers specifically for audio use - Amplimo springs to mind in Europe - http://www.amplimo.nl/en/ - their own website is pretty rubbish on their own product range, but you can find them at http://www.toroidal-transformer.com/shop...rmers.html
The "VDV" range are designed by Menno van der Veen - a well-known valve audio designer and proponent of toroidal output transformers... his book "Modern High-End Valve Amplifiers (based on toroidal output transformers)" is published by Elektor (ISBN 0-905705-63-7) in various languages - I have a copy of the English version and its a pretty good read.
Having said that, there are manufacturers who produce toroidal transformers specifically for audio use - Amplimo springs to mind in Europe - http://www.amplimo.nl/en/ - their own website is pretty rubbish on their own product range, but you can find them at http://www.toroidal-transformer.com/shop...rmers.html
The "VDV" range are designed by Menno van der Veen - a well-known valve audio designer and proponent of toroidal output transformers... his book "Modern High-End Valve Amplifiers (based on toroidal output transformers)" is published by Elektor (ISBN 0-905705-63-7) in various languages - I have a copy of the English version and its a pretty good read.
sıʌǝɹq ɐʇıʌ `ɐƃuol sɹɐ
ʞɔıu
ʞɔıu







