26-11-2015, 10:24 PM
Having carried out further checks since my last post, there is still no sound from any speaker, when using the regular audio inputs. I haven't tried the USB i/p, but have been trying to locate the switching IC-don't have it's circuit ref. to hand, but it's an 8-pin DIL device, almost certainly SMD somewhere in the rear RH corner of the PCB. If, when I locate that device, I still get no sound 'downstream' of that, then, as Mark suggests, it may not be worth proceeding any further only to find that a ' no longer available' multi-pin SMD chip is the cause of the fault!






