16-11-2015, 01:55 PM
If you are using electrolytics in series like that, remember to fit parallel resistors to ensure that the voltage is equally distributed across each pair - it is extremely unlikely that the leakage currents will match which can create a considerable imbalance otherwise.
I haven't got the circuit to hand but it may be that the EL33 has its screen grid fed directly from the HT supply. This isn't that uncommon and will lead to the screen grid voltage being higher than the anode due to the voltage drop across the primary of the output transformer.
I haven't got the circuit to hand but it may be that the EL33 has its screen grid fed directly from the HT supply. This isn't that uncommon and will lead to the screen grid voltage being higher than the anode due to the voltage drop across the primary of the output transformer.






