05-11-2015, 05:58 PM
It's a 5Y3G. They're are a lot of these on sale in America but they certainly aren't cheap.
I'm having ideas about an EZ80. The five volt supply would be about 7½V rectified and smoothed so it shouldn't be difficult to get rid of the extra 1.2V. Given that the heater current of the 5Y3G is 2A there should be plenty of headroom in the winding to allow for de-rating and the EZ80 only needs 500mA.
I'll probably just stick with the silicon though.
Cheers
Joe
I'm having ideas about an EZ80. The five volt supply would be about 7½V rectified and smoothed so it shouldn't be difficult to get rid of the extra 1.2V. Given that the heater current of the 5Y3G is 2A there should be plenty of headroom in the winding to allow for de-rating and the EZ80 only needs 500mA.
I'll probably just stick with the silicon though.
Cheers
Joe






