05-11-2015, 01:50 PM
This wireless was in regular use until a few months ago when it suddenly went off. The internal fuse had blown and after changing that it worked but seemed quieter, including on the Gram input than it usually was. I've been busy with other things since so have only just got around to investigating.
I connected it up via my lamp-limiter and that glowed much brighter than it should. I then tried it with the rectifier pulled and it didn't glow at all.
I had a look around and couldn't see anything that looked distressed, loose or that was touching what it shouldn't. I put the rectifier back in and switched it on to do some voltage checks. As soon as the switch was closed the rectifier did this
so it looks like that's the cause of the bother. Time to get the 1N4007s out.
— Joe
I connected it up via my lamp-limiter and that glowed much brighter than it should. I then tried it with the rectifier pulled and it didn't glow at all.
I had a look around and couldn't see anything that looked distressed, loose or that was touching what it shouldn't. I put the rectifier back in and switched it on to do some voltage checks. As soon as the switch was closed the rectifier did this
so it looks like that's the cause of the bother. Time to get the 1N4007s out.
— Joe






