03-11-2015, 09:17 AM
That's the KVM. It allows you to connect up to 4 computers to the same monitor, keyboard and mouse. I'm a bit short of cables, so there's enough there for 2 computers, but should you ever need more, they're cheap enough to pick up.
http://www.belkin.com/us/support-product...002G1NPAA0
They work extremely well - I use a couple here. The VGA switching has a bandwidth of 400MHz apparently - certainly, I've never seen artefacts caused by them, even when using a large-screen CRT at a high frame rate (which requires more video bandwidth than an LCD that can run at 60Hz). I used to run my CRTs at 100Hz or more, as I'm quite sensitive to flicker and the "usual" 85Hz isn't high enough for a large screen. That required a good video card!
They also switch audio - if I recall correctly, they might use relays for that. I've never used it for that...
I'm planning to transfer the PCBs of one into a more sensible box so that I can mount it behind my electronic bench, out of site. You don't need to have it within reach, as there are keyboard shortcuts to change between devices (press Scroll Lock twice, then a number key 1 to 4). If only one PC is powered, it will automatically pick that one.
Sadly, it doesn't do USB. Did you find the small green PS2 to USB adaptor? That'll hopefully allow you to plug your USB mouse into a PS2 port - most Microsoft mice can work that way, but it's not a universal standard, so no guarantees
If anyone else would like one of those Belkin KVMs, I have a few. All rescued from the skip a few years back. As I say, I'm short of cables, but should have enough to supply 2 per unit.
http://www.belkin.com/us/support-product...002G1NPAA0
They work extremely well - I use a couple here. The VGA switching has a bandwidth of 400MHz apparently - certainly, I've never seen artefacts caused by them, even when using a large-screen CRT at a high frame rate (which requires more video bandwidth than an LCD that can run at 60Hz). I used to run my CRTs at 100Hz or more, as I'm quite sensitive to flicker and the "usual" 85Hz isn't high enough for a large screen. That required a good video card!
They also switch audio - if I recall correctly, they might use relays for that. I've never used it for that...
I'm planning to transfer the PCBs of one into a more sensible box so that I can mount it behind my electronic bench, out of site. You don't need to have it within reach, as there are keyboard shortcuts to change between devices (press Scroll Lock twice, then a number key 1 to 4). If only one PC is powered, it will automatically pick that one.
Sadly, it doesn't do USB. Did you find the small green PS2 to USB adaptor? That'll hopefully allow you to plug your USB mouse into a PS2 port - most Microsoft mice can work that way, but it's not a universal standard, so no guarantees

If anyone else would like one of those Belkin KVMs, I have a few. All rescued from the skip a few years back. As I say, I'm short of cables, but should have enough to supply 2 per unit.







