Here is the circuit for the HMV1124 the 2 resistors Terry mentioned are arrowed, on the manufacturers circuit they are listed as R17 680R and R20 750R.
My bet it is either the resistor R20 or a dry joint. Try re-flowing the solder joints with good clean multicore 60/40 solder.
By the way I use these types of capacitors. You cant get much cheaper, and they do have a fairly decent length of lead, it saves having to solder wires onto those little stubs on the Wima caps. The caps you are using are intended for printed circuit use.
http://www.ebay.co.uk/itm/291569440252
They are also available from UK sellers http://www.ebay.co.uk/itm/261820249903 with free postage.
Mike
My bet it is either the resistor R20 or a dry joint. Try re-flowing the solder joints with good clean multicore 60/40 solder.
By the way I use these types of capacitors. You cant get much cheaper, and they do have a fairly decent length of lead, it saves having to solder wires onto those little stubs on the Wima caps. The caps you are using are intended for printed circuit use.
http://www.ebay.co.uk/itm/291569440252
They are also available from UK sellers http://www.ebay.co.uk/itm/261820249903 with free postage.
Mike
