24-09-2015, 11:23 AM
I've had several Epson inkjet printers and all have failed, usually just after buying a complete set of cartridges for them. One was networked through our NAS drive and when the printer died I bought a cheap HP printer to replace it but although it worked perfectly when connected to the PC it would not work on either the NAS printer port or with a HP network to USB converter. After a long correspondence with HP (lack of) support I gave the printer to my son for his uni work and bought a Brother network ready Mono laser printer which just worked after the drivers were installed on all the PCs on the network. I also had a Canon inkjet printer for colour prints. Once my daughter finished uni and started work as a primary school teacher she was always wanting colour prints but using the Canon was a bit of a faff as it wasn't networked and always needed cleaning before printing so I bought a network ready Brother colour laser printer, which just like its monochrome brother just works. There appear to be three types of toner cartridge available for this printer, the partly filled ones it come with, the two thirds full ones and the fully filled ones which, even at discounted prices from our local PC supplies shop cost more than the original printer.
The beauty of laser printers is that the just work even after being idle for weeks, something which doesn't happen with my daughter wanting prints for work. I must raise her rent to cover the cost of the toner!
I still have the Canon inkjet which gets used occasionally as it can print on CDs something a laser cannot do!
Keith
The beauty of laser printers is that the just work even after being idle for weeks, something which doesn't happen with my daughter wanting prints for work. I must raise her rent to cover the cost of the toner!
I still have the Canon inkjet which gets used occasionally as it can print on CDs something a laser cannot do!
Keith







