05-09-2015, 09:35 PM
I have not made a great deal of progress today as I had been having trouble with earth loops on the more sensitive inputs during testing of the first channel.
I do not have a battery powered high quality sine wave oscillator. I do have a very good quality mains powered unit but the earthing was giving me grief.
There were two choices.
Build a small high quality battery powered fixed frequency unit or make an isolating unit to add externally to the mains unit I already have.
The option with the lowest component count and quickest build time is in this case the isolating unit.
This consists of a small audio isolating transformer in a can that is earthed to the signal generator with an isolated output winding that connects to the sensitive inputs of the amplifier.
In my junk box I have the remains of a toy CB base station that I picked up from a pile of fly tipped waste for the small transformer and an old smoothing can as a substitute for a metal film can.
We are nearly there.
Then I will continue testing and finish off the other channel of the amplifier once I have put the top onto the can and fitted the output connector.
There may be some improvements to make to this amplifier too.
I do not have a battery powered high quality sine wave oscillator. I do have a very good quality mains powered unit but the earthing was giving me grief.
There were two choices.
Build a small high quality battery powered fixed frequency unit or make an isolating unit to add externally to the mains unit I already have.
The option with the lowest component count and quickest build time is in this case the isolating unit.
This consists of a small audio isolating transformer in a can that is earthed to the signal generator with an isolated output winding that connects to the sensitive inputs of the amplifier.
In my junk box I have the remains of a toy CB base station that I picked up from a pile of fly tipped waste for the small transformer and an old smoothing can as a substitute for a metal film can.
We are nearly there.
Then I will continue testing and finish off the other channel of the amplifier once I have put the top onto the can and fitted the output connector.
There may be some improvements to make to this amplifier too.







