27-08-2015, 04:24 PM
(26-08-2015, 09:02 PM)Mark Hennessy Wrote:(26-08-2015, 08:19 PM)Crackle Wrote: Photos, Photos, Photos, - but please reduce the pixel count size to something sensible like 1280 x 1024 even a clear photo 800 x 600 can show an awful lot.
Thanks
mike
I'd settle for them being in focus. I'm pretty sure I've mentioned this before, but we need to work out how to put this camera into "macro" mode. Failing that, take images from further away, where the camera can actually focus, then take a crop of the area of interest if desired.
NM, please allow me to make an appeal:
It's worth thinking about the quality of the advice you're getting here. It's coming from people who have a lot of knowledge and experience, and it's automatically "peer reviewed", in that if someone says something that isn't quite right, someone else will be along to clarify as needed. That's the wonderful thing about internet forums, of course, and especially here, where we have a stated aim of being especially open to those who are starting out. And, it's all free of charge! But remember that people are giving their time voluntarily.
If asking for help and advice, good clear photos and communication are a must. Right now, people are trying their best to help, and there is a lot of really good advice being given, but this goodwill can only last for so long before frustration sets in. For example, at a glance I see at least two threads where no model number has been given! It's a 2-way street, so help us to help you
Hope this helps,
Mark
Mark, I'm not asking for advice in this thread. I'm simply sharing what I'm doing at the moment. However, as you requested the actual model of the HMV - that would seem to be a reasonable demand. So, it's a 1124. I did find that some years back one of these came by the way of Howard Craven (there was an old thread on it started by Howard). He decided to pass on it as it lacks F.M. and only has Medium and Longwaves. Also, a lot of people understandably dislike wooden cabinet radios.
Now, Crackle basically confirmed what I was saying earlier about the "ladder" structure he says he's not seen it before. I also feel inclined to agree with Crackle as to the approach of just soldering onto the overhangs. That is what I decided to do. Basically you need to very carefully snip out the old capacitor. When they come off they are pretty black and blistered. You have to chemically clean them to decipher the ratings (many are around 0.047). And the best way to solder on the new cap is to make very strong solder joints with stiff, sleeved cable on all the reverse tags and wind the new cable to the front over and under the front rungs or bars. This then allows you to bridge far shorter spans and I use my usual Wimas for this. I clean all old leads with surgical spirit and the soldering is in very closed spaces.
I just got back from Maplins and am simply not happy with the pots they have. Too flimsy and modern. I also have a 3 inch shaft on mine and the lugs are much larger and more spaced. I decided to leave it and see if I can get a proper vintage pot and double pole switch. Unless maybe I can repair the old pot.








