09-08-2015, 07:19 PM
Twiddled the Calibration Pot on the 162 and that sets up the Sawtooth duration to match the 7704A. That will do for the minute.
Next the 360 Indicator.
This is simply a little (3") CRT with Support Circuits, but no Timebase or Trigger facilities.
Internally it's the usual Tektronix Build Standard.
There's a separate Compartment for the HV Section.
To be continued .....
Ode Ard Lawrence
Next the 360 Indicator.
This is simply a little (3") CRT with Support Circuits, but no Timebase or Trigger facilities.
Internally it's the usual Tektronix Build Standard.
There's a separate Compartment for the HV Section.
To be continued .....
Ode Ard Lawrence
