24-07-2015, 08:19 AM
(This post was last modified: 24-07-2015, 08:25 AM by ppppenguin.)
A view from the back. The back panel is clearly visible. 3 sets of audio/video connections, the F barrel for the aerial and the mains block temporarily fixed.
Main job now is making up some a total of 6 cables to run from the tuners to the signal sockets. I've got plenty of Scart-Scart cables so I'll butcher some to get the bits. The co-axes in the Scart cables may be a bit thin to be used reliably so I'll probably use just a pair of medium thickness co-xes from each Scart to its BNC/phono pair. Left and right channels will be combined with a pair of resistors. Value is not critical, probably 1K.
PS: It's nice not having to worry about picture re-sizing. Though I would try not to post any huge image files.
Main job now is making up some a total of 6 cables to run from the tuners to the signal sockets. I've got plenty of Scart-Scart cables so I'll butcher some to get the bits. The co-axes in the Scart cables may be a bit thin to be used reliably so I'll probably use just a pair of medium thickness co-xes from each Scart to its BNC/phono pair. Left and right channels will be combined with a pair of resistors. Value is not critical, probably 1K.
PS: It's nice not having to worry about picture re-sizing. Though I would try not to post any huge image files.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
