14-06-2015, 04:32 PM
I tend to use Poundland 60 Watt clear glass ones.
You get a direct view of the filament rather than with opal glass ones. (Obviously).
As Sam says, most domestic radios tend to range from 40 - 65 Watts or thereabouts, depending on the valve line-up.
The ubiquitous Bush DAC90A for example is listed by Bush as consuming 35 Watts.
You get a direct view of the filament rather than with opal glass ones. (Obviously).
As Sam says, most domestic radios tend to range from 40 - 65 Watts or thereabouts, depending on the valve line-up.
The ubiquitous Bush DAC90A for example is listed by Bush as consuming 35 Watts.
Regards, David.
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'
