04-06-2015, 07:45 PM
OK, I've had a quick look.
Measurements are against the Chassis.
I have to think you mean the Readout Intensity because the Intensity Control doesn't make any difference.
So:-
Max: -400mV with approx. -400mV Negative-going Pulses.
Mid Range is a bit tenuous so I turned it down until the Readout just disappeared: -300 mV with 400mV Negative-going Pulses.
Off: +2V with approx 500mV Negative-going Pulses.
It all looks very clean.
I can take pictures.
Alan
Measurements are against the Chassis.
I have to think you mean the Readout Intensity because the Intensity Control doesn't make any difference.
So:-
Max: -400mV with approx. -400mV Negative-going Pulses.
Mid Range is a bit tenuous so I turned it down until the Readout just disappeared: -300 mV with 400mV Negative-going Pulses.
Off: +2V with approx 500mV Negative-going Pulses.
It all looks very clean.
I can take pictures.
Alan
