30-04-2015, 08:57 AM
I cut the holes by first drilling around marked lines, than filing them out to get the openings as rectangular as possible. There must be an easier/quicker way, surely! Anyhow the photos below will give an impression of what is still a 'work in progress', as I want to fit clear perspex 'lens' over the display, maybe add individual 4mm sockets in parallel with the ZIF one, fit a bracket to hold a PP3 battery (at the moment I'm using a PP6 I happened to have handy), and maybe an on/off switch to prevent the meter turning itself on whilst being carried. Incidentally, the tester I bought has the larger display PCB, and I don't see how it is posible to fit a mounting screw in the top LH corner (as viewed from the front), hence only 3 screws securing the display to the case!
