28-02-2015, 09:36 AM
Up date on the KEW SNAP 9. I now have the meter working on all ranges. The Ohms range requires an out board battery holder/probe, the probe and other leads screw into their terminals, not push fit. I had to un solder the small PCB to see the Ohms terminal proper. When the Ohms only lead is connected, the screw in probe which is about25mm long, bridges two sprung loaded connections completing the circuit. This type of meter is ideal for electricians simple to use and rugged. Internally it is well made, vintage 1960 style and repairable. Ted
