22-02-2015, 11:04 AM
Any suggestions for a rotator for my aerial? Right now it's fixed but of course if I can rotate it all the better.
Also I was wondering about impedance matching for vintage radios. Even though the performance is already excellent I assume most radios if this ilk are set up for a 'long wire' type aerial and an impedance of around 300 Ohms. Ideally therefore I should have some form of 50 Ohm to 300 Ohm matching transformer in the feed to my vintage sets. Having surfed around I haven't found anything suitable so would appreciate the views of the team on this.
Cheers, John
Also I was wondering about impedance matching for vintage radios. Even though the performance is already excellent I assume most radios if this ilk are set up for a 'long wire' type aerial and an impedance of around 300 Ohms. Ideally therefore I should have some form of 50 Ohm to 300 Ohm matching transformer in the feed to my vintage sets. Having surfed around I haven't found anything suitable so would appreciate the views of the team on this.
Cheers, John
Time flies like an arrow, fruitflies like a banana!
