I recently acquired one of those and upon initial test, yes, the Hunts capacitors required replacement; no other remedial work was required. Since then, I've used it on a few occasions and the indicated results compare favourably with the calibration standards that I have and also with measurements taken on other instruments.
Looking at your photo, it doesn't show the 'stand-off' platform which plugs into the chrome-plated pillars at the top of the instrument. That platform is a very useful accessory: the manual explains the 'why' and the 'how'.
Al. / Feb. 12, '15 //
Looking at your photo, it doesn't show the 'stand-off' platform which plugs into the chrome-plated pillars at the top of the instrument. That platform is a very useful accessory: the manual explains the 'why' and the 'how'.
Al. / Feb. 12, '15 //
