30-12-2014, 06:08 PM
I was thinking of the coil having been undone by mistake while removing the back.
The ring tag is at the correct angle for it to have come off a terminal at the rear of the insulated panel.
The aerial link is in the left position to ground via R1 if it physically matches the diagram.
The middle position will then be the coil and the right position no connection so it is then parked in the dimple at the edge.
I have grabbed snippets of the diagram and photo to show what I mean.
The ring tag is at the correct angle for it to have come off a terminal at the rear of the insulated panel.
The aerial link is in the left position to ground via R1 if it physically matches the diagram.
The middle position will then be the coil and the right position no connection so it is then parked in the dimple at the edge.
I have grabbed snippets of the diagram and photo to show what I mean.







