28-08-2014, 11:03 AM
John,
If I have to change one I usually hack the old one off leaving two bits of wire sticking up and solder to those. Not pretty but it avoids damage to the PCB.
The other technique I've used is to suck from the other side to the one you've got the Soldering Iron Bit on. A pointed Bit traight into the hole usually works.
Alan
If I have to change one I usually hack the old one off leaving two bits of wire sticking up and solder to those. Not pretty but it avoids damage to the PCB.
The other technique I've used is to suck from the other side to the one you've got the Soldering Iron Bit on. A pointed Bit traight into the hole usually works.
Alan
