26-08-2014, 10:22 AM
That all sounds very reasonable Gary. Perhaps the problem really is using Resistors instead of an Inductance.
Can you add some Inductance instead of the Resistors? I had a quick look for 21W Ballasts and they seem very thin on the ground.
A radical solution would be to replace the Tube with a string of LEDs.
Alan
Can you add some Inductance instead of the Resistors? I had a quick look for 21W Ballasts and they seem very thin on the ground.
A radical solution would be to replace the Tube with a string of LEDs.
Alan
