17-05-2014, 11:34 AM
One tiny point - when fixing solder tags to capacitors etc, normally a crimp connector is used as if you solder the solder tag to the cap, seal the tube, then solder the tag to something else in the radio, the internal (tag to capacitor) joint may melt and break or become dry etc.
It would be good to make a mechanical connection between the tag & capacitor as a backup, else you might be digging out those wires again
It would be good to make a mechanical connection between the tag & capacitor as a backup, else you might be digging out those wires again
sıʌǝɹq ɐʇıʌ `ɐƃuol sɹɐ
ʞɔıu
ʞɔıu
