05-05-2014, 04:31 PM
As replacement plugs & sockets, they are easy to work with. I have just looked at my box of these and the sockets have been replaced with an RoHS equivalent - http://uk.rs-online.com/web/p/din-41612-...s/5083353/ - all my sockets have right-angled pins designed to go directly onto Eurocards - http://uk.rs-online.com/web/p/din-41612-...s/5083202/
I have more of these than I'll use in several lifetimes - if you want, I'll bung some in the post so you can have a look... all are 64-way (2 rows of 32 each). Solder onto the pin, then slide a small piece of heat-shrink over the joint - works fine.
Cheers
I have more of these than I'll use in several lifetimes - if you want, I'll bung some in the post so you can have a look... all are 64-way (2 rows of 32 each). Solder onto the pin, then slide a small piece of heat-shrink over the joint - works fine.
Cheers
sıʌǝɹq ɐʇıʌ `ɐƃuol sɹɐ
ʞɔıu
ʞɔıu
