23-04-2014, 02:21 PM
lawrence. They are multi strand wires. There are 5 fine nuts and bolts keeping both halves of plug together. I have checked inside all terminals look very clean. I have also cleaned them with elec spray. There are only 6 or so wires defective i may be able to bridge with wires across. With the wires being so close it is difficult to find where they go and solder in situe especialy the centre ones. My plan was to start again working from one end with a new idea/plug or whatever. Now that i've had feedback from yourselves. I think i will try to repair wires to existing plug. When i said the wires are falling of it's because i have to flip the plug upside down then back again to solder. Bear in mind there are 200 wires in total. Many thanks for all your feedback. richie
