11-04-2014, 08:56 AM
Refugee i now have a 20 watt 100 ohm resistor. Do i remove the 15 watt 150 ohm and replace with the 20 watt. The last time i took readings across the caps i damaged one bear in mind power supply wasn't connected to amp (no load ) The readings were 65.5v @ bridge and 50v other side of 15 watt resistor. and 14.3v on the other supply.
I had noticed prior when testing the amp the 15 watt resistor started to get hot after 3-4 nins on full mains supply it played fine for 15- 20 mins then sound distorted and uneven. That's when i took the readings above. I have noticed that on members name box there is a section with how many thank you's given received. Where on the page do i find this option. thank you
I had noticed prior when testing the amp the 15 watt resistor started to get hot after 3-4 nins on full mains supply it played fine for 15- 20 mins then sound distorted and uneven. That's when i took the readings above. I have noticed that on members name box there is a section with how many thank you's given received. Where on the page do i find this option. thank you
