03-03-2014, 04:09 PM
(This post was last modified: 03-03-2014, 04:10 PM by Radio Fixer.)
Hi Ian
Please put me down for 2 PCBs if you get some made. I e-mailed you some time back and said I had all the components but me and Perf board don't get on. I'm so busy with house improvements, and radios in between, getting PCBs is about the only way in the near future that mine will get built.
I am currently using the Peter Lankshear designed valved "Mate". I'm interested in yours as using battery may cut the intermod hum. With careful construction of the Mate it is low but I would like to try one of yours (I was going to post Peter one as a present if I get them built).
My Mate has been running 24/7 for maybe 5 years but Peter must hold the record as his has been running continuously from the 70's.
With 2 feet of wire as an aerial it covers the house for sensitive receivers (tuned RF stage).
I did once take it over to a friends house who was using an SSTRAN and there was very little between them for quality. The SS had possibly a little more treble.
thanks Gary
Please put me down for 2 PCBs if you get some made. I e-mailed you some time back and said I had all the components but me and Perf board don't get on. I'm so busy with house improvements, and radios in between, getting PCBs is about the only way in the near future that mine will get built.
I am currently using the Peter Lankshear designed valved "Mate". I'm interested in yours as using battery may cut the intermod hum. With careful construction of the Mate it is low but I would like to try one of yours (I was going to post Peter one as a present if I get them built).
My Mate has been running 24/7 for maybe 5 years but Peter must hold the record as his has been running continuously from the 70's.
With 2 feet of wire as an aerial it covers the house for sensitive receivers (tuned RF stage).
I did once take it over to a friends house who was using an SSTRAN and there was very little between them for quality. The SS had possibly a little more treble.
thanks Gary
