10-12-2013, 10:21 PM
(10-12-2013, 09:42 PM)Joe Wrote: Robert must be having an influence on me as I re-stuffed the old one.
Not me surely? Can't say I've ever re-stuffed an old resistor or capacitor for that matter - I only ever re-stuff the large can electrolytics.
Back to your TR82C - now you've tried another transistor for TR1 and got MW working again, I would back-track and look at the switching again.
Try this - connect the junction of C1/TC1/TC3 to the junction of C8/L7 (pin 4) as before with a short length of wire. Likewise, the junction of C4/TC5/TC6 to the junction of VC1/L2 (pin 6). And L3 (pin 5) to the switch end of C3. Only operate like this with the LW push switch down and see what happens.
Connected as above hard-wires the set for LW only and completely bypasses all the switching. Assuming the coils L2 and L3 are OK then it should work.
Regards
