09-12-2013, 06:46 PM
(08-12-2013, 05:05 PM)Robert Darwent Wrote: Do the three voltages on the diagram for TR1 roughly agree with readings taken in your set Joe? (B=1.0V, C=6.4V, E=1.1V)
(09-12-2013, 06:36 PM)pwdrive Wrote: If that's what your sheet says I would suggest the sheet is wrong, the emitter voltage is always lower than the base voltage.
Lawrence is correct Joe. I copied the readings the Bush service sheet gives back in post #20 and quoted again above.
Regards







