Wilmac bandsaw restoration.

0 Vote(s) - 0 Average
1
2
3
4
5

Wilmac bandsaw restoration.

Refugee

Senior Engineer in Charge

Posts: 3,270
Reputation: 6
Location: Worksop

03-12-2013, 06:14 PM

That casting looks like it was flawed when it was new as the paint has migrated into the crack.
Is there another coat of paint under the existing finish?

Quote

Messages In This Thread

Wilmac bandsaw restoration. - by Retired - 03-12-2013, 04:35 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 03-12-2013, 06:12 PM

RE: Wilmac bandsaw restoration. - by Refugee - 03-12-2013, 06:14 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 03-12-2013, 06:30 PM

RE: Wilmac bandsaw restoration. - by Retired - 03-12-2013, 08:16 PM

RE: Wilmac bandsaw restoration. - by Retired - 05-12-2013, 07:58 PM

RE: Wilmac bandsaw restoration. - by Refugee - 05-12-2013, 10:22 PM

RE: Wilmac bandsaw restoration. - by Retired - 06-12-2013, 09:05 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 06-12-2013, 09:31 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 06-12-2013, 10:18 AM

RE: Wilmac bandsaw restoration. - by Retired - 06-12-2013, 05:15 PM

RE: Wilmac bandsaw restoration. - by Yorkie - 06-12-2013, 05:31 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 06-12-2013, 05:48 PM

RE: Wilmac bandsaw restoration. - by Retired - 06-12-2013, 07:03 PM

RE: Wilmac bandsaw restoration. - by ex 2 Base - 07-12-2013, 11:32 AM

RE: Wilmac bandsaw restoration. - by Retired - 07-12-2013, 02:15 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 07-12-2013, 02:20 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 07-12-2013, 02:33 PM

RE: Wilmac bandsaw restoration. - by Retired - 07-12-2013, 05:05 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 07-12-2013, 05:27 PM

RE: Wilmac bandsaw restoration. - by Retired - 15-12-2013, 04:59 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 15-12-2013, 05:31 PM

RE: Wilmac bandsaw restoration. - by Refugee - 15-12-2013, 06:07 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 16-12-2013, 08:53 AM

RE: Wilmac bandsaw restoration. - by camallison - 16-12-2013, 09:06 AM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 16-12-2013, 10:22 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 16-12-2013, 10:26 AM

RE: Wilmac bandsaw restoration. - by Retired - 16-12-2013, 12:25 PM

RE: Wilmac bandsaw restoration. - by Retired - 18-12-2013, 12:02 PM

RE: Wilmac bandsaw restoration. - by Joe - 18-12-2013, 12:49 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 18-12-2013, 01:06 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 18-12-2013, 03:47 PM

RE: Wilmac bandsaw restoration. - by Retired - 18-12-2013, 04:12 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 18-12-2013, 05:50 PM

RE: Wilmac bandsaw restoration. - by Retired - 19-12-2013, 09:09 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 19-12-2013, 11:15 AM

RE: Wilmac bandsaw restoration. - by Retired - 19-12-2013, 11:58 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 19-12-2013, 04:34 PM

RE: Wilmac bandsaw restoration. - by Yorkie - 19-12-2013, 05:18 PM

RE: Wilmac bandsaw restoration. - by Retired - 19-12-2013, 08:07 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 20-12-2013, 08:19 AM

RE: Wilmac bandsaw restoration. - by camallison - 20-12-2013, 09:18 AM

RE: Wilmac bandsaw restoration. - by Retired - 20-12-2013, 12:03 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 20-12-2013, 05:42 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 20-12-2013, 06:07 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 22-12-2013, 06:07 PM

RE: Wilmac bandsaw restoration. - by Retired - 20-12-2013, 07:45 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 21-12-2013, 08:49 AM

RE: Wilmac bandsaw restoration. - by Retired - 21-12-2013, 10:23 AM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 21-12-2013, 10:56 AM

RE: Wilmac bandsaw restoration. - by Retired - 21-12-2013, 11:37 AM

RE: Wilmac bandsaw restoration. - by Refugee - 21-12-2013, 11:45 AM

RE: Wilmac bandsaw restoration. - by Retired - 21-12-2013, 05:00 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 21-12-2013, 05:28 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 21-12-2013, 05:42 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 21-12-2013, 06:11 PM

RE: Wilmac bandsaw restoration. - by Retired - 22-12-2013, 11:33 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 22-12-2013, 12:26 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 22-12-2013, 12:40 PM

RE: Wilmac bandsaw restoration. - by Retired - 22-12-2013, 03:35 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 22-12-2013, 03:57 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 22-12-2013, 05:50 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 22-12-2013, 05:53 PM

RE: Wilmac bandsaw restoration. - by Retired - 22-12-2013, 07:16 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 22-12-2013, 08:54 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 23-12-2013, 07:40 AM

RE: Wilmac bandsaw restoration. - by Retired - 23-12-2013, 08:02 AM

RE: Wilmac bandsaw restoration. - by Yorkie - 23-12-2013, 08:51 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 23-12-2013, 09:35 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 23-12-2013, 09:37 AM

RE: Wilmac bandsaw restoration. - by Retired - 23-12-2013, 01:05 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 23-12-2013, 03:00 PM

RE: Wilmac bandsaw restoration. - by Keithstv - 23-12-2013, 03:22 PM

RE: Wilmac bandsaw restoration. - by Retired - 23-12-2013, 04:09 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 24-12-2013, 03:40 AM

RE: Wilmac bandsaw restoration. - by Retired - 24-12-2013, 08:58 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 24-12-2013, 09:28 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 24-12-2013, 10:41 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 24-12-2013, 11:27 AM

RE: Wilmac bandsaw restoration. - by Joe - 24-12-2013, 11:56 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 24-12-2013, 12:03 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 24-12-2013, 12:18 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 24-12-2013, 01:01 PM

RE: Wilmac bandsaw restoration. - by Refugee - 24-12-2013, 01:08 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 24-12-2013, 01:28 PM

RE: Wilmac bandsaw restoration. - by Joe - 24-12-2013, 02:59 PM

RE: Wilmac bandsaw restoration. - by Retired - 24-12-2013, 04:32 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 24-12-2013, 05:08 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 24-12-2013, 06:23 PM

RE: Wilmac bandsaw restoration. - by Retired - 25-12-2013, 12:29 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 25-12-2013, 02:13 PM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 25-12-2013, 03:03 PM

RE: Wilmac bandsaw restoration. - by Retired - 25-12-2013, 07:29 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 25-12-2013, 07:40 PM

RE: Wilmac bandsaw restoration. - by Refugee - 25-12-2013, 08:21 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 25-12-2013, 08:29 PM

RE: Wilmac bandsaw restoration. - by Refugee - 25-12-2013, 08:47 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 25-12-2013, 09:45 PM

RE: Wilmac bandsaw restoration. - by Refugee - 26-12-2013, 01:07 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 26-12-2013, 09:21 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 26-12-2013, 08:48 AM

RE: Wilmac bandsaw restoration. - by Retired - 26-12-2013, 10:35 AM

RE: Wilmac bandsaw restoration. - by Refugee - 26-12-2013, 11:14 AM

RE: Wilmac bandsaw restoration. - by pwdrive - 26-12-2013, 11:21 AM

RE: Wilmac bandsaw restoration. - by AlanBeckett - 26-12-2013, 11:54 AM

RE: Wilmac bandsaw restoration. - by Refugee - 26-12-2013, 01:14 PM

RE: Wilmac bandsaw restoration. - by Joe - 26-12-2013, 01:57 PM

RE: Wilmac bandsaw restoration. - by Refugee - 26-12-2013, 03:08 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 26-12-2013, 05:26 PM

RE: Wilmac bandsaw restoration. - by Retired - 26-12-2013, 05:50 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 26-12-2013, 05:59 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 26-12-2013, 06:10 PM

RE: Wilmac bandsaw restoration. - by Joe - 26-12-2013, 06:58 PM

RE: Wilmac bandsaw restoration. - by pwdrive - 26-12-2013, 07:31 PM

RE: Wilmac bandsaw restoration. - by Retired - 26-12-2013, 09:19 PM

RE: Wilmac bandsaw restoration. - by Refugee - 27-12-2013, 12:50 AM

RE: Wilmac bandsaw restoration. - by Retired - 27-12-2013, 09:31 AM

RE: Wilmac bandsaw restoration. - by Retired - 03-01-2014, 11:37 AM

RE: Wilmac bandsaw restoration. - by Retired - 09-01-2014, 10:06 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 09-01-2014, 04:28 PM

RE: Wilmac bandsaw restoration. - by Retired - 09-01-2014, 07:55 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 09-01-2014, 10:27 PM

RE: Wilmac bandsaw restoration. - by Refugee - 10-01-2014, 12:18 AM

RE: Wilmac bandsaw restoration. - by Retired - 12-01-2014, 11:23 AM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 12-01-2014, 06:24 PM

RE: Wilmac bandsaw restoration. - by Retired - 13-01-2014, 04:16 PM

RE: Wilmac bandsaw restoration. - by Retired - 14-01-2014, 07:56 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 15-01-2014, 05:40 PM

RE: Wilmac bandsaw restoration. - by Retired - 15-01-2014, 07:57 PM

RE: Wilmac bandsaw restoration. - by Retired - 21-01-2014, 05:10 PM

RE: Wilmac bandsaw restoration. - by Retired - 25-01-2014, 12:35 PM

RE: Wilmac bandsaw restoration. - by Refugee - 25-01-2014, 02:49 PM

RE: Wilmac bandsaw restoration. - by Retired - 25-01-2014, 03:28 PM

RE: Wilmac bandsaw restoration. - by Refugee - 25-01-2014, 03:43 PM

RE: Wilmac bandsaw restoration. - by Retired - 01-02-2014, 12:28 PM

RE: Wilmac bandsaw restoration. - by camallison - 01-02-2014, 12:42 PM

RE: Wilmac bandsaw restoration. - by Retired - 01-02-2014, 02:05 PM

RE: Wilmac bandsaw restoration. - by camallison - 01-02-2014, 02:19 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 01-02-2014, 05:36 PM

RE: Wilmac bandsaw restoration. - by Retired - 01-02-2014, 09:59 PM

RE: Wilmac bandsaw restoration. - by Retired - 03-02-2014, 05:39 PM

RE: Wilmac bandsaw restoration. - by Retired - 10-02-2014, 05:39 PM

RE: Wilmac bandsaw restoration. - by camallison - 10-02-2014, 06:02 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 10-02-2014, 06:08 PM

RE: Wilmac bandsaw restoration. - by Retired - 10-02-2014, 07:38 PM

RE: Wilmac bandsaw restoration. - by camallison - 10-02-2014, 08:20 PM

RE: Wilmac bandsaw restoration. - by camallison - 10-02-2014, 08:22 PM

RE: Wilmac bandsaw restoration. - by Radio Fixer - 11-02-2014, 08:03 AM

RE: Wilmac bandsaw restoration. - by Retired - 11-02-2014, 10:14 AM

RE: Wilmac bandsaw restoration. - by camallison - 11-02-2014, 10:37 AM

RE: Wilmac bandsaw restoration. - by Retired - 11-02-2014, 11:38 AM

Users browsing this thread:

1 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me