19-08-2013, 07:42 PM
Hi Lawrence, the wires are quite small and relatively "stiff", but I have known them to give microphony with external vibration.
High dissipation can cause them to sag, which may modify the (pretty small) capacitance.
Note that if the valves are to be used horizontal then the data books suggest that the grid support structures should be above and below, not side to side.
Ed
High dissipation can cause them to sag, which may modify the (pretty small) capacitance.
Note that if the valves are to be used horizontal then the data books suggest that the grid support structures should be above and below, not side to side.
Ed
