Aldi Multi-Tool

[pwdrive]

Hi Col, putty's old hat, use Flexistrip, sticks like s*it and is a dead even thickness and width as it comes off the roll, fix to inside pane first, around the perimeter, make sure window rebate has been fully painted, peel off backing tape, push DG unit into frame, (don't forget the glazing spacers) push firmly in place, it will stick and stay there no problem as if by magic, fit Flexistrip around the perimeter of the outside pane, remove backing tape, press home pre painted wooden glazing beads, secure beads with sheradized pins, punch home, top pin holes up with filler then a dab of paint, trim any excess Flexistrip off by scoring with a knife, paint over it if required, job done....Fast.

Pic attatched: With this stuff the glazing spacers are included in the packet as are the Sheradized glazing bead pins.

Lawrence