01-04-2013, 01:13 PM
It took a fair bit of searching in order to get the correct replacements for the chips but it did work first time once they were in. I kept the amount of work on the PCB to a minimum in order to protect it from tracks lifting and so on.
I did write up a restoration post while i was working on it.
http://vintagetvandradio.myfreeforum.org...c.php?f=15&t=2892&p=29565&hilit=Micos#p29565
I had to do a fair bit of work on it including making up the sensor.
The thread also explains how it stops the motor when the correct number of turns have been wound.
I did write up a restoration post while i was working on it.
http://vintagetvandradio.myfreeforum.org...c.php?f=15&t=2892&p=29565&hilit=Micos#p29565
I had to do a fair bit of work on it including making up the sensor.
The thread also explains how it stops the motor when the correct number of turns have been wound.
