01-04-2013, 11:07 AM
I do have spare chips for it and they are fixed anyway as it was the right hand side digit that failed.
The decimal point is not connected so the point position is not an issue as i have looked at the data sheet and checked this out. It would not matter if a replacement was GNP-7 or GNP-7A for this task.
I have saved the old tube. The sections only partially illuminate.
Have you reactivated any from this state or do you have a web link?
The existing tubes are GNP-7.
The decimal point is not connected so the point position is not an issue as i have looked at the data sheet and checked this out. It would not matter if a replacement was GNP-7 or GNP-7A for this task.
I have saved the old tube. The sections only partially illuminate.
Have you reactivated any from this state or do you have a web link?
The existing tubes are GNP-7.
