12-12-2012, 04:10 PM
Hi Rob, thanks. Simple when you know how. For anybody who has same trouble only two screws to remove at the front of the board the center screw at the front should not be removed or the angle frame will be loose and may fall into the machine. The two "earth" straps at rear are infact hinges and should not be undone. As Rob says the rear of the board is only tucked in and should be pulled forwards.
Once I got to the belts they seem ok fast forwards and rewind work but in Play the take up spools do not turn and stops after 10 seconds, with the Capson spewing tape out. Any idears?
When I got the set 3 years ago it worked for about 30 minutes then it developed the above fault.
John.
Once I got to the belts they seem ok fast forwards and rewind work but in Play the take up spools do not turn and stops after 10 seconds, with the Capson spewing tape out. Any idears?
When I got the set 3 years ago it worked for about 30 minutes then it developed the above fault.
John.
