27-10-2012, 02:07 PM
Hi Joe, I am sure everyone understands so no worries, as to the theory well it depends on what knowledge we need to take on such jobs, in general the bar is set quite low theory wise, if as you say post war 5 valvers is no problem then a basic comms set or any other set that has limited info available should not be an insurmountable job providing any spares etc can be got. The receiver in question, the PCR2 is basically the same as a post war woody but with an RF Amp stage.
Although we all sort of vaguely know each other by way of the forum it is sometimes difficult to ascertain what's going on at the other end, you mentioned the theory, well as said the basic theory is quite staight forward.
At the end of the day it's what the person wants to learn in relation to how comfortable they feel about it.
Are you familiar with the basic blocks of valve radios ie: what bit does what and why and what to expect from each section? I know when I first started I didn't have a bloody clue at all, some might say I still don't. Never be afraid to ask.
Lawrence.
Although we all sort of vaguely know each other by way of the forum it is sometimes difficult to ascertain what's going on at the other end, you mentioned the theory, well as said the basic theory is quite staight forward.
At the end of the day it's what the person wants to learn in relation to how comfortable they feel about it.
Are you familiar with the basic blocks of valve radios ie: what bit does what and why and what to expect from each section? I know when I first started I didn't have a bloody clue at all, some might say I still don't. Never be afraid to ask.
Lawrence.
