06-09-2012, 08:20 AM
Hi,
I came across the two following "You Tube" videos which might be of interest to a number of members; both cover Triumph motorcycle manufacture but they are most interesting in that they show the machines in use that made the parts. It was interesting to me to watch how the gears were cut and to watch how the frames were brazed together. I've not done any brazing for many years but the method I used was oxy/acetylene torch dipping the brazing rod into Sif Bronze flux.
http://www.youtube.com/watch?v=s-ABelgFdjA&feature=related
http://www.youtube.com/watch?v=ipiD6nm7Iy0&feature=relmfu
Kind regards, Col.
I came across the two following "You Tube" videos which might be of interest to a number of members; both cover Triumph motorcycle manufacture but they are most interesting in that they show the machines in use that made the parts. It was interesting to me to watch how the gears were cut and to watch how the frames were brazed together. I've not done any brazing for many years but the method I used was oxy/acetylene torch dipping the brazing rod into Sif Bronze flux.
http://www.youtube.com/watch?v=s-ABelgFdjA&feature=related
http://www.youtube.com/watch?v=ipiD6nm7Iy0&feature=relmfu
Kind regards, Col.
Happiness is a wreck of a cabinet to restore.
