21-07-2012, 03:59 PM
if you are right john you are going to have to look at motor start caps or microwave hv caps but they may be too big.
useing 230 volt would reduse the cap value but then you would need a dropper for the ht.if you are going to use 110 volts i would maybe reconsider a resistive dropper ie one of the metal clad types.
rob t
useing 230 volt would reduse the cap value but then you would need a dropper for the ht.if you are going to use 110 volts i would maybe reconsider a resistive dropper ie one of the metal clad types.
rob t
if its made by hand it can be repaired by hand
