17-07-2012, 07:27 PM
(This post was last modified: 18-07-2012, 12:09 AM by Robert Darwent.)
I acquired a model 41 Groom some time ago, it is still awaiting my attention to be restored. I can however, confirm that the value of 100 uF for C24 is correct as per the circuit diagram.
C24 is actually two 100 uF electrolytics housed in a large square screening can. One is connected after the 25Z6 rectifier between HT and what looks to be some sort of bias arrangement for the output valve, with the other connected between HT and the chassis.
Regards
C24 is actually two 100 uF electrolytics housed in a large square screening can. One is connected after the 25Z6 rectifier between HT and what looks to be some sort of bias arrangement for the output valve, with the other connected between HT and the chassis.
Regards
