05-07-2011, 05:39 PM
(05-07-2011, 02:17 PM)ThePillenwerfer Wrote: Well, there's life in the beast.
I changed the two caps that Yorkie mentioned, though on my data THAT capacitor is C26. I hadn't got any 0.0047μF ones but have got 0.0022μF and 0.0033μF and space certainly isn't a problem.
- Joe
Sorry for the confusion Joe - I was quoting from the ERT Sheet rather than the Trader Sheet, and the use different numbers for 'that' cap - C25 on the ERT Sheet - C26 on the Trader Sheet. (C27 is the same on both sheets - the one across the OPT primary). I should really have stated the source of data to save confusion.
Great news that the field coil on the speaker is intact - they're very prone to going O/C on mains energised speakers, especially if for some reason the set is drawing excess current as the field coil (L22 on ERT Sheet - L21 on Trader Sheet) carries the HT load for the whole set, doubling as the smoothing choke across the two smoothing caps.
Have fun!
David







