05-07-2011, 08:23 AM
Congrats on winning the set at the auction Joe!
An attractive set, with a large chassis which should be easy to work on.
Doubltess it will have been an expensive set in its day, in that it has several features which set it aprt from more basic radios of the era, in that it not only has short waveband, but also an RF stage, with a three section tuning cap and an additional valve to what was the norm, making six valves in total, including the rectifier. Intriguing that it has some invoices with it to show its history. It will have been one of the last radios released before the war in 1940 - shortly after that, it was the Civilian radio or nothing. The speaker is mains energised (before the war, the couldn't make permanent magnets with a powerful enough flux density I believe), so hopefully, the field coil (L21 - 1,500 Ohms), which also acts as a smoothing choke, will be intact. Field coils - being thousands of turns of fine gauge wire - are rather prone to going open circuit. Rather than go to the expense of a re-wind, some restorers remove mains energised speaker and fit a modern permanent magnet one, which of course destroys the integirty of the set. As was standard, it has a' hum bucking' coil (L20, which is just 0.2 Ohms, and the speech coil, 1.5 Ohms) - all three coils will be concentrically mounted on the speaker. The extension speaker socket seems to come straight off the HT line at the primary rather than secondary of the output transformer, and an extension speaker of 5000 Ohms is called for. No doubt you'll have studied the circuit and concluded that C25 (.02) and C27 (.005) are definite candidates for changing, come what may.
I wonder if you've taken a chance and plugged it in Joe? If it works, - if only after a fashion, you're half way there! Well worth spending some time on a radio from what was really, the end of the 'golden era' of radio design and production in Britain.
Best of luck with the restoration Joe - do keep us informed of progress!
David.
An attractive set, with a large chassis which should be easy to work on.
Doubltess it will have been an expensive set in its day, in that it has several features which set it aprt from more basic radios of the era, in that it not only has short waveband, but also an RF stage, with a three section tuning cap and an additional valve to what was the norm, making six valves in total, including the rectifier. Intriguing that it has some invoices with it to show its history. It will have been one of the last radios released before the war in 1940 - shortly after that, it was the Civilian radio or nothing. The speaker is mains energised (before the war, the couldn't make permanent magnets with a powerful enough flux density I believe), so hopefully, the field coil (L21 - 1,500 Ohms), which also acts as a smoothing choke, will be intact. Field coils - being thousands of turns of fine gauge wire - are rather prone to going open circuit. Rather than go to the expense of a re-wind, some restorers remove mains energised speaker and fit a modern permanent magnet one, which of course destroys the integirty of the set. As was standard, it has a' hum bucking' coil (L20, which is just 0.2 Ohms, and the speech coil, 1.5 Ohms) - all three coils will be concentrically mounted on the speaker. The extension speaker socket seems to come straight off the HT line at the primary rather than secondary of the output transformer, and an extension speaker of 5000 Ohms is called for. No doubt you'll have studied the circuit and concluded that C25 (.02) and C27 (.005) are definite candidates for changing, come what may.
I wonder if you've taken a chance and plugged it in Joe? If it works, - if only after a fashion, you're half way there! Well worth spending some time on a radio from what was really, the end of the 'golden era' of radio design and production in Britain.
Best of luck with the restoration Joe - do keep us informed of progress!
David.







