20-06-2011, 07:29 PM
ah on that site its pivot to spindle my arm is the lvx p to s= 211mm
mission p to s =215 mm
thorns p to s =210 mm
i tried a rega rb250 p to s = 222mm but the traking error was to great .
i would like to try an sme 3009 but it looks daunting.
have you found a good mat im still experimenting
rob t
mission p to s =215 mm
thorns p to s =210 mm
i tried a rega rb250 p to s = 222mm but the traking error was to great .
i would like to try an sme 3009 but it looks daunting.
have you found a good mat im still experimenting
rob t
if its made by hand it can be repaired by hand
